Project
Pest ProofingEntry Point ExclusionMouse ControlRodent ControlCompleted October 2026

Full-Perimeter Mouse and Bat Exclusion on a Coquitlam House

A Coquitlam home had mice and bats working the same gaps around decks, siding, and a utility box. A multi-visit exclusion program sealed the mapped entry points and closed with a bat cone removal and a permanent mesh seal.

SITE CONTEXT

Single-family residential property, Coquitlam, two decks and a utility box

PROGRAM SCOPE

Guaranteed Mouse-Proofing Option 3, full exterior exclusion plus bat cone

DELIVERY MODEL

Two-technician crew across multiple visits

DOCUMENTATION

Service reports on file; bat cone removed and utility box sealed with 1/4" mesh

Mice and bats working the same gaps on a Coquitlam property

A Coquitlam homeowner had been dealing with more than one kind of intruder. Mice were getting into the basement and garage, and bats had found their own way in through a utility box beside the deck. The two problems were connected: both pests were exploiting the same category of gap, the small seams where siding meets foundation, where a deck frame meets the house, where a utility line punches through the wall. An earlier repair at one entry point had been patched with copper mesh and steel wool, materials that look like a fix but don't hold up the way a proper excluder does once animals start working at them.

An assessment had already mapped the problem across the whole exterior. The scope wasn't a single hole to plug, it was a full perimeter: siding gaps, deck framing, an underdeck storage door that didn't seal when locked, a utility box, and pedestrian door frames.

Gaps mapped across decks, siding, and a utility box

The assessment identified entry points at the garage door, the yard wall, the porch door and its footings, the utility box beside the deck, the underdeck storage door, and gaps beneath the deck stairs where foundation meets siding. Two separate decks on the property meant the crew had to clarify on site which structure a given gap belonged to before sealing it, since the same description ("where siding meets foundation under the deck") applied to both.

The storage door was a particular problem: when locked, it pulled away from its frame and opened a gap wide enough for rodents to use. The front deck door and the ground converged in a way that created a seasonal gap whenever the door swung open fully. And the utility box wasn't just a rodent entry, it had bats using it as well, which meant the seal there had to account for both species before it could be closed for good.

Sealing siding, deck framing, and a utility box in stages

The work was scoped under our Guaranteed Mouse-Proofing program and ran across several visits as the crew worked through the full exterior. On the first pass, the crew pest-proofed the garage door, installed flashing along the yard wall and around the corner to the back, flashed the door under the front porch, and replaced the old copper mesh and steel wool at a prior entry point with proper Excluder material. Flashing went in on the utility box, though full sealing there wasn't finished that visit given how much ground the crew had to cover.

On the follow-up visit, the remaining scope closed out: flashing over the siding gaps, excluder stuffing under the front deck storage area, and a new door jamb built around all sides of the storage door so it finally sealed properly when locked. The utility box got 1/4" mesh treatment and, because bats were using that same opening, a bat cone was installed as a one-way door, letting any bats already inside leave without letting new ones back in. A garage door sweep went on, and interior mouse monitoring stations were set up across the basement and garage.

On a later visit, a technician returned specifically to close the bat cone. The utility space was inspected, the cone was removed, and the opening was sealed permanently with 1/4" mesh, converting the temporary one-way exit into a finished, closed seal.

The Outcome

We were hired to seal the gaps bats and mice were using around this Coquitlam house and get monitoring in place to confirm the work held. The exclusion scope is complete, the bat cone has been pulled, and the utility box is now permanently sealed with mesh instead of a temporary one-way door.

House sealed, bat cone closed for good

  • The storage door now seals properly against its frame instead of pulling away when locked.
  • Siding gaps and deck framing gaps around the property are flashed and sealed rather than patched with mesh and steel wool.
  • The utility box that bats and mice were both using is treated with 1/4" mesh and permanently closed, with the bat cone removed once the space was clear.
  • Interior monitoring stations are in place in the basement and garage to track any activity going forward.
  • A new garage door sweep closes off one of the largest remaining gaps on the property.

No pest activity was recorded on any of the service visits beyond the site contact's own existing glue trap practice, and the final visit's report notes the utility space sealed to prevent further bat entry. For a property with entry points spread across two decks, a storage area, and a utility box, the job called for the kind of structural work covered under our pest-proofing and entry-point exclusion programs rather than a single treatment, with ongoing monitoring built in to confirm it holds. Anyone dealing with a similar mix of rodent and bat activity around deck framing or utility lines can read more on our mouse control page or in the house mouse library entry.

Need Pest Proofing?

Comprehensive exclusion audit and sealing of all entry points. The last pest service your property needs.

View Pest Proofing
All ProjectsPest control in Coquitlam

Ready to Resolve It?

Inspection, root-cause resolution, and documented follow-up. No obligation.