Project
Entry Point ExclusionRat ControlRodent ControlPest ProofingCompleted April 2026

Strata attic re-entry sealed at the fascia and chimney soffit

One unit's attic in an Abbotsford strata building pest-proofed the year before showed two suspected rodent entry points. We found a gap behind the fascia flashing and a soffit pushed back beside the chimney, and sealed both under warranty.

PROGRAM SCOPE

Exclusion at fascia flashing and chimney soffit, plus one old one-way door removed and sealed

SITE CONTEXT

Multi-unit strata building in Abbotsford, with four units pest-proofed the prior year

DELIVERY MODEL

Inspection, a repair visit with one-way doors and sealing, then a short visit to pull the doors

DOCUMENTATION

Notes on each of the three visits, with the job closed in early April 2026

Strata suspected renewed rodent activity in a pest-proofed attic

Four units in this Abbotsford strata building had been pest-proofed the year before. The strata came back with a warranty request for one of those units. It reported two suspected rodent entry points into the attic, possible renewed activity, and asked for the openings to be found and sealed.

Pest-proofing is meant to close the way in, so new activity in a proofed attic points to a gap that was missed or has opened since. The job was to find where that gap was and close it under the warranty on the earlier work.

A gap behind the fascia and a soffit pushed back at the chimney

The warranty inspection confirmed two entry points. The first was along a raised section of the roof, where a long strip of fascia runs with flashing behind it. There was a hole between the fascia and the flashing big enough for animals to get in.

The second was at the chimney. The soffit where it meets the chimney had been pushed back, leaving an opening at the roof edge. Rats can squeeze through surprisingly small gaps, so a displaced piece of trim at a junction like this is enough to give them a way in.

Mesh at the soffit, solid flashing at the fascia

The repair visit dealt with both openings and with an old one-way door still on the building. That old door was removed and its opening sealed, so it can't become a way back in.

Rat one-way doors went on at the two new openings. They let animals leave on their own but not come back in. The soffit beside the chimney was capped with mesh, and the fascia was sealed with solid brown flashing. The plan called for 60 feet of it.

The final visit was short. The one-way doors came off the soffit by the chimney and the face of the flashing, and the tech assessed the areas the team had flagged before the job was closed.

The Outcome

The strata asked us to find how rodents were getting into the attic of one pest-proofed unit and seal the openings under warranty. Both openings are sealed, and the warranty job is closed.

Both entry points sealed under warranty

  • The fascia flashing gap and the soffit opening beside the chimney, the two entry points the strata reported, are both sealed.
  • The old one-way door is gone and its opening is sealed, so it can't be used as a way in.
  • The chimney soffit is capped with mesh, and the fascia gap is closed with solid flashing.
  • The job closed in early April 2026 after three visits, with notes recorded on each one.

The building's other pest-proofed units were not part of this repair. This work covered one unit and the two openings into its attic, and both are now closed.

Work like this falls under our entry point exclusion service. Multi-unit buildings that see rodent activity across several units can also look at our strata property and rat control services.

Some photos on this page are representative photos from similar jobs our crews have done, not photos of this property.

Need Entry Point Exclusion?

Professional-grade sealing of gaps, vents, soffits, and utility penetrations across the entire structure.

View Entry Point Exclusion More entry point exclusion in Abbotsford
All ProjectsPest control in Abbotsford

Ready to Resolve It?

Inspection, root-cause resolution, and documented follow-up. No obligation.